Versions Compared

Old Version 14

changes.mady.by.user EDUARD POROSNICU

Saved on

compared with

New Version Current

changes.mady.by.user EDUARD POROSNICU

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

Text NOTAM production rules

This section provides rules for the automated production of the text NOTAM message items, based on the AIXM 5.1.1 data encoding of the Event. Therefore, AIXM specific terms are used, such as names of features and properties, types of TimeSlices, etc:

  • the abbreviation TWY.BL. indicates that the corresponding data item must be taken from the Taxiway BASELINE;
  • the abbreviation TWY.TD. indicates that the corresponding data item must be taken from the Taxiway TEMPDELTA that was created for the Event in case of complete taxiway limitation;
  • the abbreviation AHP.BL. indicates that the corresponding data item must be taken from the AirportHeliport BASELINE associated with the Taxiway concerned;

    • According to encoding rule ER-02, the TEMPDELTA might also include ManoeuvringAreaAvailability elements that have been copied from the BASELINE data for compliance with the AIXM Temporality rules. The current practice is to not include such static information in the NOTAM text. Therefore, all ManoeuvringAreaAvailability that have operationalStatus='NORMAL' will be ignored for the NOTAM generation.

In general, the ICAO DOC 8126 and the OPADD rules shall be followed. These have not been copied in this document in order to avoid duplication with those documents. Only instructions that are specific to the AIXM encoding of this event are stated here.

Table of Contents

Item A

The item A shall be generated according to the general production rules for item A using the Event.concernedAirportHeliport.

Item Q

Apply the common NOTAM production rules for item Q, complemented by the following specific rules for this particular scenario:

Q code

The following mapping shall be used:

Note: In this table, "any" means "any value or no value (NIL)".

TWY.TD.availability.ManoeuvringAreaAvailability

Corresponding Q code

timeIntervalusage.ManoeuvringAreaUsage

TWY.BL.type

type

operationpriorPermission../FlightCharacteristics../AircraftCharacteristicsother than 'FASTEXIT''FASTEXIT'
not NIL'PERMIT''ALL'NILNILNILQXXXXQMXXXQMYAH
any'RESERVE'anyanyonly military='MIL'anyQXXXXQMXXXQFPAM
any'CONDITIONAL'anynot NILanyanyQXXXXQMXXXQMYAP
any'PERMIT'anyNILanyanyQMXARQMYAR
any'RESERVE'anyanyonly origin='HOME_BASED'anyQXXXXQMXXXQMYLB
any'FORBID'anyanyanyweight not NILQMXLHQMYLH
any'FORBID'anyanyanywingSpan not NILQMXLLQMYLL
any'FORBID'anyanyrule = 'IFR'anyQXXXXQMXXXQMYLI
any'FORBID'anyanyrule = 'VFR'anyQXXXXQMXXXQMYLV
any other combinationQMXLTQMYLT
Scope

Insert the value ‘A’.

Lower limit / Upper limit

Use “000/999”

Geographical reference

Insert the coordinate of the ARP (AHP.BL.ARP.ElevatedPoint) of the airport, formatted as follows:

  • the set of coordinates comprises 11 characters rounded up or down to the nearest minute; i.e. Latitude (N/S) in 5 characters; Longitude (E/W) in 6 characters;
  • the radius value is “005”.

Items B, C and D

Items B and C shall be decoded following the common production rules.

If at least one TWY.TD.availability.ManouevringAreaAvailability.timeInterval exists (i.e. the Event has an associated schedule), then all such Timesheet(s) shall be represented in item D according to the common NOTAM production rules for Item D, E - Schedules. Otherwise, item D shall be left empty.

Item E

The following pattern should be used as a base for generating the E field text from the AIXM data:

Code Block
titleEBNF Code
collapsetrue
template = ["(1)" "AHP.BL.type (2)" ("AHP.BL.name (3a)" | "AHP.BL.ARP (3b)")] \n 
("Rapid exit TWY(4)" | "TWY") "TWY.BL.designator" ["TWY.TD.ManoeuvringAreaAvailability.annotation(5)"] {"(6)" (","| "and") ("Rapid exit TWY(4)" | "TWY") "TWY.BL.designator" ["TWY.TD.ManoeuvringAreaAvailability.annotation(5)"]} "TWY.TD.usage.type(7)".

template_middle = ["TWY.TD.usage.flight(8)"] ["TWY.TD.usage.aircraft(9)"] "TWY.TD.usage.operation(10)" ["conditions(11)"] { "(12)" "," ["TWY.TD.usage.flight(8)"] ["TWY.TD.usage.aircraft(9)"] "TWY.TD.usage.operation(10)" ["conditions(11)"]}.

template_bottom = ["\n" "due to" "TWY.TD.availability.annotation(13)"] "." \n
{"TWY.TD.availability.annotation(14)" "\n" "."}.

Reference

Data item (from coding scenario)

Rule

(1)


If AHP.BL.locationIndicatorICAO is not null, then ignore this branch.

(2)


Insert here the type of the airport decoded as follows

AHP.BL.type

Text to be inserted in Item E

AD or AH

"AD"

HP

"Heliport"

LS or OTHER

"Landing site"

(3)

airport name

(a) If AHP.BL.name is not null, then insert it here. (b) Otherwise, insert here the text "located at" followed by the AHP.BL.ARP.ElevatedPoint decoded according to the text NOTAM production rules for aixm:Point

(4)


if TWY.BL.type = 'FASTEXIT' insert the words “Rapid exit". Otherwise, insert "TWY".

(5)affected taxiway descriptionInsert here the TWY.TD.availability.ManoeuvringAreaAvailability.annotation with purpose='DESCRIPTION'  translated into free text according to the decoding rules for annotations. 

(6)

taxiway designatorIf more than one TWY.TD is associated with the Event, repeat this branch for each such Taxiway. Insert "," before consecutive taxiways and insert "and" before the last taxiway affected by the closure (e.g. "TWY A, TWY B and TWY C") 

(7)

conditional for

closed, except for

prohibited for

additionally allowed for

Insert here TWY.TD.availability.ManoeuvringAreaAvailability.usage.ManoeuvringAreaUsage as follows:

typeText to be inserted in item E
"CONDITIONAL""available for"
"RESERV""closed, except for"
"PERMIT""now available for"
"FORBID""prohibited for"

(8)

flight

Decode here each FlightCharacteristics property that was specified, as detailed below. If more than one FlightCharacteristics property was used, insert blanks between consecutive properties.

FlightCharacteristics.type*

Text to be inserted in Item E

OAT

"Operational Air Traffic"

GAT

"General Air Traffic"

ALL

"Operational Air Traffic/General Air Traffic"

OTHER:MY_TEXT

"my text" (replace "_" with blanks)

*Note: type is unlikely to be used in a NOTAM, its decoding is provided for completeness sake.

FlightCharacteristics.rule

Text to be inserted in Item E

IFR

"IFR"

VFR

"VFR"

ALL*

"IFR/VFR"

OTHER:MY_TEXT

"my text" (replace "_" with blanks)

*Note: value is unlikely to be used in a NOTAM, its decoding is provided for completeness sake.

FlightCharacteristics.status

Text to be inserted

HEAD

"Head of State"

STATE

"State acft"

HUM

"HUM"

HOSP

"HOSP"

SAR

"SAR”

EMERGENCY

"EMERG"

ALL

"State acft/HUM/HOSP/SAR/EMERG"

OTHER:MEDEVAC

“MEDEVAC”

OTHER:FIRE_FIGHTING

“fire fighting”

OTHER:MY_TEXT

"my text" (replace "_" with blanks and convert to lowercase)

FlightCharacteristics.military

Text to be inserted in Item E

MIL

"MIL acft"

CIVIL

"civil acft"

ALL*

"civil/MIL acft"

OTHER:MY_TEXT*

"my text" (replace "_" with blanks)

*Note: value is unlikely to be used in a NOTAM, its decoding is provided for completeness sake.

FlightCharacteristics.origin

Text to be inserted

NTL

"domestic"

INTL

"intl"

HOME_BASED

"home based"

ALL*

"domestic/intl"

OTHER:MY_TEXT*

"my text" (replace "_" with blanks)

*Note: value is unlikely to be used in a NOTAM, its decoding is provided for completeness sake.

FlightCharacteristics.purpose

Text to be inserted

SCHEDULED

"scheduled"

NON_SCHEDULED

"not scheduled"

PRIVATE*

"private"

AIR_TRAINING

"training"

AIR_WORK*

"aerial work"

PARTICIPANT

"participating acft"

ALL*

"scheduled/not scheduled/private/training/aerial work/participating acft"

OTHER:MY_TEXT*

"my text" (replace "_" with blanks)

*Note: value is unlikely to be used in a NOTAM, its decoding is provided for completeness sake.

(9)

aircraft

Decode here each AircraftCharacteristics property that was specified, as detailed below. If more than one AircraftCharacteristics property was used, insert blanks between consecutive properties.

AircraftCharacteristics.type

Text to be inserted in Item E

LANDPLANE

"landplanes"

SEAPLANE*

"seaplanes"

AMPHIBIAN

"amphibians"

HELICOPTER

"hel"

GYROCOPTER

"gyrocopters"

TILT_WING

"tilt wing acft"

STOL

"short take-off and landing acft"

GLIDER*

"gliders"

HANGGLIDER*

"hang-gliders"

PARAGLIDER*

"paragliders"

ULTRA_LIGHT*

"ultra lights"

BALLOON*

"balloons"

UAV*

"unmanned acft”

ALL*

"all acft types"

OTHER:MY_TEXT

"my text" (replace "_" with blanks)

*Note: value is unlikely to be used in a NOTAM, its decoding is provided for completeness sake.

AircraftCharacteristics.engine

Text to be inserted in Item E

JET

"jet acft"

PISTON

"piston acft"

TURBOPROP

"turboprop acft"

ELECTRIC**

“electric engine acft”

ALL

"all engine types"

OTHER:MY_TEXT

"my text" (replace "_" with blanks)

**Note: new in AIXM 5.1.1.

AircraftCharacteristics.wingSpan - insert the value followed by the value of the uom attribute. Prefix with the value of AircraftCharacteristics.wingSpanInterpretation, decoded as indicated in the following table:

AircraftCharacteristics.wingSpanInterpretation

Text to be inserted in Item E

ABOVE

"acft with wingspan more than"

AT_OR_ABOVE

"acft with wingspan equal to or more than"

AT_OR_BELOW

“acft with wingspan equal to or less than"

BELOW

"acft with wingspan less than"

OTHER:MY_TEXT*

"my text" (replace "_" with blanks)

*Note: value is unlikely to be used in a NOTAM, its decoding is provided for completeness sake.

AircraftCharacteristics.weight - insert the value followed by the value of the uom attribute. Prefix with the value of AircraftCharacteristics.weightInterpretation, decoded as indicated in the following table:

AircraftCharacteristics.weightInterpretation

Text to be inserted in Item E

ABOVE

"acft mass heavier than"

AT_OR_ABOVE

"acft mass equal to or heavier than"

AT_OR_BELOW

"acft mass equal to or lighter than"

BELOW

"acft mass lighter than"

OTHER:MY_TEXT*

"my text" (replace "_" with blanks)

*Note: value is unlikely to be used in a NOTAM, its decoding is provided for completeness sake.

(10)

operation

Decode here the TWY.TD.availability.usage.operation as follows:

TD.usage.operation*

Text to be inserted in Item E

LANDING*

"for landing"

TAKEOFF*

"for tkof”

TOUCHGO*

"for tgl"

TRAIN_APPROACH*

"for practice low approaches"

TAXIING

"for taxiing"

CROSSING

"for crossing"

AIRSHOW

"for acft participating in air display”

ALL**

"for all operations"**

*Note: value is unlikely to be used in a NOTAM referring to the taxiway limitation, its decoding is provided for completeness sake.

**Note: if all operations are affected, then either provide the text as described above or do not provide the text at all.

(11)

PPR time 

PPR details

If TD.usage.priorPermission is not NIL, then insert here the decoding of the PPR information as detailed in the following diagram:

Code Block
titleEBNF Code
collapsetrue
template_PPR = "PPR " "TWY/TWE.TD.usage.priorPermission(11.1)" ["TWY/TWE.TD.usage.annotation(11.2)"].

Reference

Rule

(11.1)

Insert here the value of the priorPermission attribute followed by @uom attribute decoded as follows:

uom value

Text to be inserted in Item E

HR

"HR"

MIN

"min"

SEC

"sec"

OTHER:MY_TEXT

"my text" (replace "_" with blanks and convert to lowercase)

(11.2)

Decode here the annotation with propertyName='priorPermission' and purpose='REMARK', according to the decoding rules for annotations.

(12)


If there exists a parent TWY.TD.availability.ManoeuvringAreaAvailability.usage.ManoeuvringAreaUsage.selection.ConditionCombination with logicalOperator='OR' (there are more than one flight/aircraft/operation combinations that are concerned), then select and decode each child subCondition.ConditionCombination/... consecutively and insert the comma separator.

(13)reasonIf there exists a TWY.TD.availability.ManoeuvringAreaAvailability.annotation having propertyName='operationalStatus' and purpose='REMARK', then translate it into free text according to the decoding rules for annotations.

(14)

note

Other annotations of TD.ManoeuvringAreaAvailability shall be translated into free text according to the decoding rules for annotations.

Items F & G

Leave empty.

Event Update

The eventual update of this type of event shall be encoded following the general rules for Event update or cancellation, which provide instructions for all NOTAM fields, except for item E and the condition part of the Q code, in the case of a NOTAMC

If a NOTAMC is produced, then the 4th and 5th letters (the "condition") of the Q code shall be "AK", except for the situation of a “new NOTAM to follow", in which case “XX” shall be used.

The following pattern should be used for automatically generating the E field text from the AIXM data

Code Block
titleEBNF Code
collapsetrue
template_cancel = ["(1)" "AHP.BL.type (2)" ("AHP.BL.name (3a)" | "AHP.BL.ARP (3b)")  ] ("Rapid exit TWY(4)" | "TWY") "TWY.BL.designator" {"(6)" ("," | "and") ("Rapid exit TWY(4)" | "TWY") "TWY.BL.designator"} ("resumed normal operations." | " : New NOTAM to follow.(15)").

Reference

Rule

(15)

If the NOTAM will be followed by a new NOTAM concerning the same situation, then the operator shall have the possibility to choose the "New NOTAM to follow" branch.  This branch cannot be selected automatically because this information is only known by the operator.

Note: in this case, the 4th and 5th letters of the Q code shall also be changed into “XX”.